1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar


Forum


Welcome to the GigaPan Forum!

This is the place for Gigapan.com members to offer peer-to-peer support for exchanging tips, ideas, comments, etc.

Those who need direct technical assistance with their GigaPan EPIC Series imagers, stitching software or gigapan.com membership account should contact us.

Forums » General Gigapanning » to set ‘Field of View’

 
to set ‘Field of View’
alexandre castro alexandre castr...
Total Posts: 7

EPIC it will prompt you to set ‘Field of View’
What value to put FujiFilm x10?

Charles Davis Charles Davis
Total Posts: 15

This is a simple process, made more difficult by the wording…

Which model of GigaPan do you have?

With my Epic 100, when it shows that message, it wants the user to hit the “OK” button…then it will prompt you to align first the top and then the bottom of the frame with the horizon. It then has measured the vertical FoV…it will display the value.

Note that the V FoV is different depending on the specific FL selected [IE, “zoom”]. Your 10X camera has many FLs that vary over a 10:1 RANGE. You should select ONE of those FLs and go through the FoV measurement process.

It’s not possible [at least on the low-end model like I have] to directly set the FoV value.

alexandre castro alexandre castr...
Total Posts: 7

thank´s charles davis


Forums» General Gigapanning » to set ‘Field of View’