1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar


Forum


Welcome to the GigaPan Forum!

This is the place for Gigapan.com members to offer peer-to-peer support for exchanging tips, ideas, comments, etc.

Those who need direct technical assistance with their GigaPan EPIC Series imagers, stitching software or gigapan.com membership account should contact us.

Forums » General Gigapanning » Shoot in Portrait mode

 
Shoot in Portrait mode
cnibley cnibley
Total Posts: 3

How can I “setup” my camera to shoot in portrait mode? I have my Nikon D800e in a RRS right angle bracket mounted sideways on my Gigapan Pro. When I set up using a 3:2 ratio, won’t that confuse the software? Shouldn’t I be able to set the camera at 2:3 to make it understand that the cameras on it’s side? Thanks!

Mosley Hardy Mosley Hardy
Total Posts: 129

I use a D800e as well.

You can change the aspect ratio in the settings under expert options. I believe (working from memory here) that the one you need is 0.65:1 or thereabouts.

You won’t be able to use the Stitch software though. Unlike Autopano Giga or others, it only understands landscape images.

cnibley cnibley
Total Posts: 3

Thanks!

cnibley cnibley
Total Posts: 3

Also, .65 is correct

Andrew Milne Andrew Milne
Total Posts: 1

I’ve used Stitch EFX successfully in portrait mode, although only tried it with a single row.


Forums» General Gigapanning » Shoot in Portrait mode