Log In now to add this Gigapan to a group gallery.
Log In now to add this Gigapan to a gallery.
About This GigapanToggle
- Taken by
- Rich Gibson
- Explore score
- 1.12 Gigapixels
- Date added
- Sep 24, 2010
- Date taken
- Sep 24, 2010
My Makerbot arrived, and so I spread out all of the pieces on a table and took 170 pictures of it...what else should one do with a new Makerbot?
For the uninitialized, the Makerbot is a 3D printer. A robot that makes things. You create a model in software, and then send GCode and the Makerbot makes it See makerbot.com Interstingly and not accidentally, we are using the same GCode interpreter in some of the micro and macro gigapan rigs, and also if you look at a Makerbot through the
right lens it looks similar to something you might use for a macro or micro gigapan...the whole world of moving (machine tool|camera) under computer control to
(make|take pictures of) things has much overlap.
My friend asked me what I wanted to make with the Makerbot and my answer was something that looks like a makerbot, or probably a Reprap Mendel (a similar rig) with a camera in place of the extruder head...
Where in the World is this GigaPan?Toggle
GigaPan Stitch version 1.0.0804 (Macintosh)
Panorama size: 1117 megapixels (48256 x 23156 pixels)
Input images: 170 (17 columns by 10 rows)
Field of view: 120.8 degrees wide by 58.0 degrees high (top=-8.1, bottom=-66.1)
All default settings
Original image properties:
Camera make: Canon
Camera model: Canon PowerShot G9
Image size: 4000x3000 (12.0 megapixels)
Capture time: 2010-09-24 14:32:00 - 2010-09-24 15:01:45
Exposure time: 0.04 - 0.05
Focal length (35mm equiv.): 207.7 mm
Digital zoom: off
White balance: Fixed
Exposure mode: Manual
Horizontal overlap: 22.0 to 75.5 percent
Vertical overlap: 19.5 to 99.1 percent
Computer stats: 1792 MB RAM, 2 CPUs
Total time 58:23 (21 seconds per picture)
Alignment: 5:04, Projection: 3:11, Blending: 50:08
(Preview finished in 23:03)